NORTH ANDOVER, MA—Responding to the demands of its clients, nVIUS Graphics, a full-service production house located in northeast Alabama catering to packaging printers and converters across the U.S., upgraded its flexo plate making capabilities by installing the CRON-ECRM HDI 1600 H.
The company’s first CDI could only produce plates up to 48-in. x 35-in. However, as business continued to grow and expand, the need for more automation and a larger plate became obvious. “We deal with a lot of wide web flexographic printers that print up to a 60-in. wide web,” said Robert Reed, president of nVIUS Graphics. “We needed the larger size, and better screening. So with the HDI 1600 H we can image plates up to 9600 dpi. We have seen great improvement in the printing quality for our customers.”
The time it takes to produce a digital flexo plate can also impact an operation’s profitability. “We’re getting twice the plate size and resolution, in the same amount of time—it’s nearly a 200 percent increase,” said Robert. He reports that with the CRON-ECRM HDI 1600 H, nVIUS Graphics can now image a 42 x 60-in. plate, at twice the resolution, in the same amount of time, more than doubling the shop’s productivity.
“Another factor that impacted our profitability was the very high maintenance contracts that we were tied to with our previous imaging device,” said Robert. The HDI 1600 H is part of the high-resolution HDI digital imaging family of products from CRON that has a standard two-year parts warranty. “These economies allow us to produce higher quality plates, for less cost. The technical support we receive is great and we feel CRON is part of us.”
nVIUS not only upgraded its digital flexo plate making capability, but also took a look at its digital workflow. Working with CRON, nVIUS opted for the Kodak Prinergy EVO workflow system, which integrates with the features of the Prinergy Powerpack workflow, the Pandora step-and-repeat software, and Kodak’s award-winning Maxtone, DigiCap and Hyperflex screening.
“We have used CRON’s solution for several months now and have greatly benefited from it,” said Robert. “Most of our customers have really come to rely on us for more than just making plates because they know we have a printing background. We know the press side, we have that experience using these plates on the pressroom floor. We have a lot of clients that will call us for advice or our opinion on what they’re doing on press, aside from the fact that we make the plates.”
“nVIUS has built an impressive business,” said John Marzec, business manager, CRON-ECRM, “and we are pleased to be part of the next evolution of their business. Our HDI 1600 H plate making system will allow them to tackle whatever job comes through their door, no matter how complex, how fast the turn-around times, or how large the press the plates are needed for. We are excited to serve them, and we look forward to being their partner for many years to come.”